[STV-FL] general-purpose container flat with steel legs with a ball valve
Features
Liquid is useful for small portions of the middle and.
Stainless steel container and valve, has excellent chemical resistance due to the use of a PTFE valve seal.
? The tip of the nozzle because you are using a threaded joint, it can be connected to other piping or the like.
? Container so that can be fixed, the leg has a hole of 10o.
? Tall to be able to feed water to the beaker bottle, was the height of the up to the nozzle to 200o.
Product Specifications
1, container ... SUS304
2, nipple ... SUS304
3, ball valve ... SCS14
4, both the nipple ... SUS304
5, screwed elbow ... SUS304
6, Hirahaganeashi ... SUS304 thickness 3mm width 25mm number three Fai10㎜ with holes (common each size)
● Surface treatment: the inner and outer surfaces buffing
● use conditions: atmospheric pressure (pressurization and depressurization is impossible)
Capacity: 4L, 7L, 10L, 15L, 20L, 25L, 36L
Reference Dimensional Drawing
Q&A
- ＱCan be mounted in a custom-made to your choice of the valve to your desired location.
- Ａ[ST-W] general faucet (brass + plating) comes with. In the case of the contents of chemical resistance is required are suitable [STV] with a ball valve (stainless steel).
- Ｑ100L more you tank you want with a valve, but ....
- ＡWe will correspond by custom-made.
- ＱIs it possible to installation of the level meter and fittings?
- ＡI attached to the location of your choice in the custom-made.
- ＱThere is no tank of want capacity.
- ＡWe manufacture in the hope of capacity by special order.
- ＱThe type and mounting position of the valve is or will be changed?
- ＡCan be mounted in a custom-made to your choice of the valve to your desired location.