[KTTK-J-L] stirrer seat with a piece tapered jacket vessel with legs


This bottom inclined container attachable to a portable stirrer.
You can move between each container process with a caster leg.
Water is with a jacket that can temperature control by flowing.

○ single tapered container [KTT-J-L] a stirrer for mounting was fitted with a pedestal of (clamping).
○ bottom plate is inclined in the discharge direction, contents can be discharged smoothly.
Since ○ discharge port is attached to the sides of the container, it can shorten the routing of the piping.
○ is a caster with legs of a stirrer can be moved while attached to the container.
○ It is hygienic rust resistant stainless steel container.
○ Connect can liquid feed pump.

View Optional Machining

​Product Specifications

Containers and jacket leg ... SUS304

Lid ... SUS304

Caster ... SUS + urethane vehicles (two with the inner stopper)

Packing ... silicon rubber (Food Sanitation Law compliant products)

Drain height (H2) ... 400㎜

Jacket portion nozzle ... 15A ferrule

● Surface treatment: the inner and outer surfaces buffing

● use conditions: atmospheric pressure (pressurization and depressurization is impossible)

※ stirrer is sold separately. By your meeting separately, we will quote.

※ also available designed and manufactured to suit your existing clamp-type agitator (mixer).

Reference ​Dimensional Drawing


This product will not be able to apply pressure. of href="https://www.nitto-kinzoku.co.jp/archives/product/dt-tj-l/" target="_blank"> breakdown voltage specification.
can. There is SUS316L.
I corrosion resistance of need ...
It can surface treatment of the fluorine resin coating.
Size is not in the catalog, can I capacity?
We manufacture by changing the height of the container of the near capacity.
Do you Doren'nozuru is can be changed?
Size difference or nipple, you can change the socket or the like.
I'd like to make pressure on the jacket portion.

Contact Us







It is our job, of course, to conduct in-depth meetings with our sales and manufacturing staff and to design and draft products.

Eighty percent of made-to-order products are completely made-to-order items, and drawing drawings for these custom-made products have a track record of 80,000 sheets so far.

There are many difficult requests, and they have been created through trial and error. They are all accumulated as our knowledge.