[CTHV-LV / CTHV-LV-FL] sealed container with level gauge valve
The remaining amount was fitted with a level gauge can be seen at a glance.
It is a round stainless steel container with a convenient ball valve to the subdivision.
○ valve also made of stainless steel, seal of the valve is excellent for chemical resistance of PTFE.
○ is the level with a meter that can grasp the remaining amount without opening the lid.
○ the tip of the nozzle is, because of the threaded joint, you can connect.
○ to prevent the scattering of the contents to prevent the intrusion of dust, is sealed type with packing.
○ [CTHV-LV-FL] to be able to water supply in tall beaker bottle, was the height of the up to the nozzle to about 200mm.
○ [CTHV-LV-FL] As the container can be fixed, the leg has been vacant 10mm hole of.
Body lid ... SUS304
Packing ... silicon rubber (Food Sanitation Law compliant products) [PQA]
Nipple ... SUS304
Ball valve ... SCS14
Both nipple ... SUS304
Screw elbow ... SUS304
Union ... SUS316
Tube ... PFA
Hirahaganeashi ... SUS304 / thickness 3mm / width 25mm / number three / φ10mm with hole (CTHV-LV-FL only)
● Surface treatment: the inner and outer surfaces buffing
● use conditions: atmospheric pressure (pressurization and depressurization is impossible)
Capacity: 20L, 25L, 36L, 65L, 100L
Other capacity can also be manufactured.
※ the time of discharge, please open the lid.
It will be less likely to be discharged remains sealed.
Reference Dimensional Drawing
- ＱWe manufacture in the hope of capacity by special order.
- ＡDifferent lid. [STV] is with Kabusebuta (stock lid), [CTHV] can be easily sealed with a clip of the body comes with a sealed lid.
- ＱWhat is a closed container [CTHV] with a ball valve and the difference of the container [CTH-W] with faucet?
- Ａ[CTH-W] general faucet (brass + plating) comes with. In the case of the contents of chemical resistance is required are suitable [CTHV] with a ball valve (stainless steel).
- Ｑ100L more you tank you want with a valve, but ....
- ＡWe will correspond by custom-made.
- ＱMounting position of the type and level meter valve Do you changed?
- ＡIt can be manufactured in the hope of the valve. In addition, the level meter can be installed to your desired location.
- ＱThere is no tank of want capacity.
- ＡWe manufacture in the hope of capacity by special order.