[CTB] hanging sealed container (clip-on)

​Features

To easily carry, it is a sealed container of the bucket type.
You can easily sealed with a clip.

○ for carrying CTH container handle for hanging on the (crane) the was put.
When ○ sealed container transportation, scattering of the contents to prevent contamination such as dust from the outside.
○ packing is silicon rubber is the standard of the Food Sanitation Law compliant products.
○ the corner of the bottom is hard to R structure that accumulate dirt.

View Optional Machining

​Product Specifications

The container body ... SUS304

Lid (sealing lid [MF]) ... SUS304

Vine ... SUS304

Catch clip ... SUS304

Packing (A type [PQA]) ... silicon rubber (Food Sanitation Law compliant products)

● Surface treatment: the inner and outer surfaces buffing

● use conditions: atmospheric pressure (pressurization and depressurization is impossible)

※ packing, type (B type) to be mounted on the lid side to of change it is also possible. It will be easy to handle when flushed out the contents.

There is also made SUS316L.

types that can be stacked storage.

Capacity: 4L, 7L, 10L, 15L, 20L, 25L

Please contact us for more capacity.

Reference ​Dimensional Drawing

Model # List

ModelCapacityWeightIDInternal
Height
Extarnal
Diameter
Maximum
Width
Container
Height
Overall
Height
ClipPlate
Thickness
BottomGasketRoHSLead
Time
LkgDH1W1W2H2H3QuantitytRA-typeB-typeDays
CTB-1841.418018019223518430930.75Compliant2
CTB-2171.721021022226821633630.75Compliant2
CTB-24102.224024025430024742030.75Compliant2
CTB-27152,82702702843274645230.85Compliant2
CTB-30203.430030031636230648330.85Compliant2
CTB-33254.233033034639233654740.85Compliant2
Unit of length is mm.

Details & Notes

Stainless steel tank that can be held with one hand, which is ideal for carrying around a lot

In the two-handle type with handles on both sides, you must carry it with both hands, but this product uses a hanging handle, and you can lift the container with one hand. Also, when not transporting, the handle will fall over and will not take up any width.

Simple sealed structure that prevents the contents from scattering during transportation

This product is a clip-type airtight container. After attaching the packing and covering it with the lid, hang the catch clip attached to the container body on the lid to seal it. > Click here for the packing installation video

Easy-to-clean corner radius bottom

Since it is a round stainless steel container, there is no edge.
R (R /roundness) is attached to the rising part of the bottom, making it easy to remove dirt without the contents entering.
It can be used hygienically because it has excellent cleanability inside the container that comes into direct contact with the contents.

You can purchase only the “lid”, “packing”, and “container body”

We also accept orders for consumables separately. Please let us know your desired specifications at the time of quotation (Example: I want only the packing of CTB-30).
* We do not sell only handles.

Made-to-order case

We will design and manufacture custom-made products from one item. Please feel free to contact us.


Chemical manufacturer adoption case

Two padlocks are attached to the left and right so that opening and closing can be controlled.

See this case

Related products

With lower handle

View this product

With transparent lid

View this product

Band type airtight containers are also available

View this product

Q&A

Can I change the material of the container?
I can do it. also available SUS316L-made products in the standard.
Or packing there is a material other than silicon?
There is a material such as fluorine rubber.
Are you under pressure?
You can not pressure.
Do you detached vine?
Taking into account the safety, it has become a specification that can not be removed. However, pulling strongly the vine, possession that it may come off as being the use of such lifting grabbed the other (pipe section), please be careful when handling.
We want those with a scale.
you standard there is a product with a scale. special order is also possible.

Contact Us

联系人姓名*

电子邮件地址*

国名/地域名*

公司名称*

附件
×

联系内容*

It is our job, of course, to conduct in-depth meetings with our sales and manufacturing staff and to design and draft products.

Eighty percent of made-to-order products are completely made-to-order items, and drawing drawings for these custom-made products have a track record of 80,000 sheets so far.

There are many difficult requests, and they have been created through trial and error. They are all accumulated as our knowledge.