[BA-M] stainless steel bucket with scale (with spout)

​Features

Pharmaceutical, optimum all-stainless steel bucket for use in chemical systems
Weighing and the remaining amount confirmation is with easy to scale.

You can use easily for the transport and introduction of such ○ powder, liquid.
○ Depending on the size 2L, is equipped with a scale for each 5L, it is easy to weigh.
○ It is with one hand hanging lifted the container handle type.
Since ○ spout is attached, it is useful for or poured Dari-up.
○ bottom is equipped with a skirt to protect, there are hygienic not adhere directly to the floor.

View Optional Machining

​Product Specifications

The container body, hakama ... SUS304

Vine ... SUS304

The length of the scale ... about 25mm ※ scale will be the approximate location of capacity.

● Surface treatment: the inner and outer surfaces buffing

● lid is sold separately. ( stainless bucket for the lid [BAF] )

※ The number and position of the scale can be changed.

※ vine is in consideration of the safety, it has become a specification that can not be removed.

However, pulling strongly the vine, such as lifting grab the non-possession (pipe section)

That it may come off as being how to use, please be careful when handling.

※ stacking (nesting) at the time of the scale irregularities and interference.

Reference ​Dimensional Drawing

Q&A

Please contact us.
We will correspond by custom-made. Please contact us for more details.
Or memory can be confirmed from the inside?
You can check. Driving the scale toward from the outside of the tank on the inside, it has been recessed to the inside.
The number of scale, location Do you changed?
You can change. Please tell us the number and position of your choice.
Do you can change the length of the scale?
It is longer is possible. Please contact us for more details.
Not only the scale, Can you also hit the numbers of capacity?
Please contact us.

Contact Us

联系人姓名*

电子邮件地址*

国名/地域名*

公司名称*

附件
×

联系内容*

It is our job, of course, to conduct in-depth meetings with our sales and manufacturing staff and to design and draft products.

Eighty percent of made-to-order products are completely made-to-order items, and drawing drawings for these custom-made products have a track record of 80,000 sheets so far.

There are many difficult requests, and they have been created through trial and error. They are all accumulated as our knowledge.